Skip to main content

How to set wifi in mswipe terminal


How to set WiFi:-

    Followed by these steps in your device:-

1)  On G2/G2 plus device



if

2) Again press on/off  button 


3)Press Down key one time

4)Press 2 number and select WIFI SETTING

5)Press 1 for set name your SSID(wifi name)
  • For selecting capital alphabet use this keyword 2(up), 4(left), 6(right), 8(down), 5(select)
  • for small case alphabet press down key
  • for numbers again press down key
  • for symbols press down key




after press enter button.
6) Press 2 number for the password  set

and do the above selection process
  • For selecting capital alphabet use this keyword 2(up), 4(left), 6(right), 8(down), 5(select)
  • for small case alphabet press down key
  • for numbers again press down key
  • for symbols press down key
and then press the enter button


Now check the connection option which option is selected
 
  if a star is on wifi then the device is wifi mode


if a star is on cellular then the device is in sim card  mode 

if not connect then check your router setting there is WPA2PSK(personal/enterprise) or mixed on the security goto admin panel of your router set this :



Note:- if your device is an older version so, please raise a complaint about firmware update on the Mswipe merchant app or helpdesk@mswipe.com and get in touch with 18001022699



   





Comments

Unknown said…
System halt ikke ramper
January 15, 2020 at 6:17 PM
Chandan said…
18602662699 Call this number
April 3, 2020 at 12:21 PM
Unknown said…
Sir I have, G2 mashin it but I am facing no connection problem kindly solve
May 9, 2020 at 1:40 PM
Chandan said…
if you facing gateway error please check internet speed
which mode you use device wifi or sim
May 25, 2020 at 4:24 PM
amit pandey said…
sir i facing some wifi setup problem from Lucknow. I complained several times to customer care but they only said some representative meet me on my shop pls help to setup or send me a representative or engineer to setup my swipe machine mswipe g2 model

My contact no. -08418055147 (Amit Pandey)
June 2, 2020 at 8:24 PM
Unknown said…
Hello

I am using wise pad G2

But I can’t see options for WIFI setting

In settings I can see
1.Mode
2.Device Info
3.Logout

1.Test
June 11, 2020 at 5:59 PM
Chandan said…
your device firmware is old so these option is not shown. please raise the complaint through app and change latest firmware device
June 11, 2020 at 10:41 PM
Unknown said…
I am unable to perform any task.
The screen shows SYSTEM HALT. what should i do
June 24, 2020 at 6:23 PM
Chandan said…
please generate complaints for device replacement

18602662699 call this number or Follow this Open Mswipe Merchant app go in support section then click on ticket >raise a ticket>select your device serial number>technical problem>device >system halt b4 error> continue
June 25, 2020 at 8:22 AM

Post a Comment

Popular posts from this blog

Mswipe technical support

   If you have to face a problem on your terminal then contact this no 18001022699. Now I tell you some basic problems in Mswipe terminal:- Network issue :-   1) Firstly you check your sim card is activated or not. 2) then you check the sim card proper inserted in your device. 3) then you check the mode of device if your device is standalone mode then check GPRS Test.                                                                                          System halt :- 1)  in this case your terminal shows some numbers on a screen or shows hf reset or hang your device. 2)  if you have the above type problem then call customer care no. 18602662699 3)  if not response then send mail in this Email helpdesk@mswi...
23 comments
Read more

How to use Mswipe merchant app

How to use Mswipe Merchant App :-                   Open  Mswipe merchant app and  login with mobile number and password       Now follow these steps:-  Open app Enter Mobile number  Enter pin  Go on the report section and then select a history option all transaction are showing in month-wise select which month data you want to see all transaction is showing in date-wise now select date   all transactions are showing. How to know all transaction amount is credit in your bank account:-       Go on the report option and then select an SOA option all transaction are showing in month-wise select which month data you want to see                                           all transaction is showing in date-wise now select date  all transactions are showing click on view de...
1 comment
Read more